Is a 16 ohm impedance good for earphones? is updated by A perfect galaxy A perfect galaxy is a type of technology collecting all necessary data to analyze and select Cell Phones & Accessories products...
When people are searching for a new pair of headphones, they usually spend a lot of time reading their characteristics and specifications but the truth is they pay more attention to physical characteristics, battery life, Bluetooth version, etc. The part where frequency response, sensitivity, and impedance are listed are often skipped and neglected but these are very important features that affect headphone performance and sound quality.
If you don’t know how your headphones work, you won’t be able to use them and maintain properly, and this is often one of the reasons why people are complaining about their headphones performance. We have run into this problem so many times that we have decided to write this article and explain headphone impedance in detail. If you understand what impedance is and why it is important for your device, you will use your headphones correctly and be more satisfied with their sound.
What is Impedance?
The term impedance was used for the first time at the end of the 19th century and, by definition, it is the measure of the opposition of a circuit when current is going through an electrical device. Impedance is marked with Z and it is measured in Ohms. It is also equal to zero when the voltage and current are constant (direct current) but it can never be equal to zero when alternating current runs through the device.
Impedance actually describes the relationship that exists between voltage and current in a circuit that consists of capacitors, inductors, and resistors.
See More : Which headphone is best in boAt?
Impedance VS resistance
Impedance and resistance are commonly confused terms and one of the reasons may be the fact that they are both measured in Ohms. However, these two terms don’t have the same meaning and they most certainly don’t relate to the same thing.
Impedance is a real vector with two dimensions. It consists of two phenomena – resistance and reactance, which means resistance can never be equal to impedance because resistance is contained in impedance, which has both magnitude and phase.
See More : Are Beats By Dre worth it?
Resistance, on the other hand, is an imaginary vector that has only magnitude. It enables us to measure the opposition of electron movement among atoms in a substance. As atoms accept electrons, the resistance becomes lower.
When alternating current is running through a system (device), its sinusoidal wave is always generated at a certain frequency. This affects electrical components of the device, making their resistances vary along the power source frequency. This is why we can say that impedance is the voltage and current frequency domain ratio.
When direct current is running through the device, we can’t establish a difference between impedance and resistance because of relating sinusoidal voltages and currents by linear law.
See More : Which headphones are best for ears?
What is Headphone Impedance?
Based on what we have previously said about impedance in general, we can say that headphone impedance is the measure of the opposition of the headphones to the audio source signal. It is also expressed in Ohms and it is one of the characteristics included in the specification list that is often being neglected.
However, impedance is extremely important for anybody who cares about sound quality. Headphones can be divided into two categories based on their impedance (low and high-impedance headphones) and depending on the group your headphones belong to, you have to use them differently.
When we say this, we think about devices the headphones are connected to, which are the power and audio sources. If you use your headphones with an appropriate device, you will achieve maximum sound quality, including maximum loudness.
Why is Important to Know Headphone Impedance?
As we have mentioned, by their impedance, headphones can be divided into two groups: low-impedance and high-impedance headphones. Different people have different theories about headphone impedance. Some think that low impedance is impedance lower than 25 Ohms while the others think that it can go even higher and still be considered low impedance. We belong to the other group and, in our opinion, any impedance lower than 50 Ohms can be considered low. So, let’s see how you should use the headphones depending on their impedance.
See More : Which is the best headset brand?
Low-impedance headphones (16, 18, 32, 40 Ohms, etc.) are the most common on the market. Actually, most of the portable headphones (on-ear, over-ear headphones, earbuds, in-ear headphones) belong to this group and it is the consequence of their purpose. They are made to be used “on the go” while connected to portable electrical devices that are used as audio and power sources (smartphones, tablets, players, etc.). As you can see, these devices are battery-powered devices, which means they can’t supply your headphones with a lot of power. This is why we use them with low-impedance headphones that don’t require a powerful source to drive them.
High-impedance headphones (everything from 50 to 600 Ohms) are the headphones that require more power to drive them and they are commonly used in music studios or by DJs. They are mostly made for professional use but if you have a good amp that matches your headphones, you can also use high-impedance headphones at home. Just don’t try to drive them by using your phone or take them outside the house because it will be a great disappointment.
In case you really want headphones that will be able to perform at least decently with both types of sources, you can get, for example, 32-Ohm version. These can be driven with both battery-powered devices and amplifiers. They won’t show their best in both situations but they will most certainly sound better than 16-Ohm headphones with an amplifier or 600-Ohm headphones with a smartphone.
Impedance mismatch can’t destroy your headphones or the audio source but it is definitely very important to obey the basic rules of impedance matching for better performance. When you use a battery-powered device with low-impedance headphones, for example, a player with a 3-5-volt battery, the signal voltage is low at the output and these two devices are able to create high current and the headphones will deliver great sound. On the other hand, if you connect low-impedance headphones to a powerful amplifier, you risk blowing them out because they have a low threshold limit. Also, if you plug high-impedance headphones to a battery-powered device, they won’t be able to create high current. The voltage will also be lower and all of this will lead to very poor sound quality and low headphone volume.
Which Headphones are Better Choice?
Headphone impedance is significantly affected by the voice coil in the drivers. Low-impedance headphones have thicker voice coil that is also cheaper and easier to make while high-impedance headphones have extremely thin voice coil that can be thinner than a human hair, which is also more difficult to make.
Thicker coils have fewer layers of wire, which makes them so easy to make. This is one of the reasons why they are more available and much cheaper. Thinner coils have more windings and smaller diameter that allows less air to go between the layers, making the wires tighter and electromagnetic field more powerful. Generally, this kind of voice coil decreases the risk of sound being distorted, which will make the high-impedance headphones better. To be honest with you, they do sound clearer and more natural, while their bass is more present and nicely defined. Also, the high-impedance headphones’ soundstage is wider than the soundstage of low-impedance headphones.
However, no matter what their build and way of manufacturing tells us, we still claim that it is more important to match the impedance correctly than simply buy a new and expensive pair of high-impedance headphones. If you decide to do it, we advise you to check some of the high-impedance models made by Beyerdynamic or Sennheiser. Beyerdynamic makes headphone models with different impedance values, so you might even be able to find a good compromise between high and low-impedance headphones at a reasonable price.
Hello, my name is James Longman.
I’m a writer and editor at AudioReputation. I disassembled my first portable AM/FM radio when I was only 8. At the age of 11, I burned the circuit board on my old boombox cassette player. I’m not going to explain how but it was reckless and stupid.
Since then, I have become much more careful around radios, boomboxes, and other audio devices (at least, I like to think so) but I have never lost the passion for audio equipment. Throughout 20 years of my professional career, I’ve been working for various audio equipment manufacturers and even started building speakers on my own in my little workshop.
I love the work we do here at AudioReputation. Testing, comparing, and evaluating all kinds of audio devices (speakers, soundbars, headphones, home theater systems, etc.) is something I truly enjoy. I try to be unbiased and give you my honest opinion on every piece of equipment I test. Still, you should take my reviews with a pinch of salt and always be just a little bit skeptical. The fact that I liked some speaker or soundbar doesn’t mean that you are going to love it. If you have the opportunity, you should test it/hear it before buying it.
- What Are Stereo Amplifiers and How Do They Work?
- What Does a Speaker Switch Do?
- How to Measure Sound Quality of Speakers?
- How to Measure Sound Quality of Headphones
- IPX Rating Explained
- Speaker Sensitivity Explained
- Understanding Headphone Driver Units
- 17 Best Bluetooth Headphone Adapters 2021
Is a 16 ohm impedance good for earphones? is updated by A perfect galaxy A perfect galaxy is a type of technology collecting all necessary data to analyze and select Cell Phones & Accessories products.